Aquascape Pro Pondless 49000 Instructions & Maintenance - Page 5
Browse online or download pdf Instructions & Maintenance for Water Pump Aquascape Pro Pondless 49000. Aquascape Pro Pondless 49000 16 pages. Waterfall vault
Print Page
4
PREPARE BASE
The base of the excavation should be smooth soil, fl at and
free of lumps and debris. Check the size and depth of the
excavation by placing the Pondless
AquaBlox
into the excavated area. The AquaBlox
®
sit level on the front ledge of the Pondless
well as line up level to the side of the vault.
5
INSTALL GEOTEXTILE AND LINER
• Install Outer Geotextile - Lay the geotextile into the
excavation covering the bottom and sides. Multiple
sections of geotextile can be overlapped to accomplish
complete coverage.
• Install Liner - Lay the liner into the excavation and position
to cover entire storage basin. Do not trim the excess liner
material until later in the project.
www.aquascapeinc.com |
Waterfall Vault and
®
should
®
Waterfall Vault, as
®
See diagram below
CAN 1-866-766-3426 |
There should be approximately 6" between the
for example.
AquaBlox
and the soil. Add compactible material such as
®
sand, if existing soil conditions do not meet requirements listed
above. The compactible material should be spread to a 4"
minimum depth and compacted.
AquaBlox
should sit level on front ledge
®
as well as line up level to side of the vault.
• Optional Inner Geotextile - An optional second layer of
geotextile may be used within the lined storage basin. The
second layer is wrapped around the bottom and sides of the
AquaBlox
helping further protect the liner from the edges
®
of the AquaBlox
. The secondary inner layer of geotextile
®
is especially useful protection on bigger storage basins that
contain a larger quantity of AquaBlox
US 1-866-877-6637
.
®
5