- ページ 11

スイッチ HP 1410-24G-RのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。HP 1410-24G-R 21 ページ。 1410 switch series
HP 1410-24G-R にも：仕様 (33 ページ), 仕様 (33 ページ), クイック・セットアップ・マニュアル (2 ページ)

ページを印刷する

Figure 2 Mounting the HP 1410-24-R switch in the rack

NOTE:

The mounting brackets are used only for attaching the switch instead of bearing the switch weight. A

holder on the rack is used to hold (bear the weight of) the switch.

Mounting the switch on a workbench

IMPORTANT:

Ensure good ventilation and 10 cm (3.9 in) of clearance around the chassis for heat dissipation.

•

Avoid placing heavy objects on the switch.

To mount the switch on a workbench:

Make sure the workbench is securely grounded and is stable.

Place the switch upside down, and clean the round holes on the bottom of the chassis with a dry

cloth.

Attach the rubber feet to the four round holes on the bottom of the chassis.

Place the switch with right side up on the workbench.