HP 1410-24G-R 시작하기 매뉴얼 - 페이지 11

{카테고리_이름} HP 1410-24G-R에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 1410-24G-R 21 페이지. 1410 switch series
HP 1410-24G-R에 대해서도 마찬가지입니다: 사양 (33 페이지), 사양 (33 페이지), 빠른 설정 매뉴얼 (2 페이지)

페이지 인쇄
HP 1410-24G-R 시작하기 매뉴얼
Figure 2 Mounting the HP 1410-24-R switch in the rack
NOTE:
The mounting brackets are used only for attaching the switch instead of bearing the switch weight. A
holder on the rack is used to hold (bear the weight of) the switch.

Mounting the switch on a workbench

IMPORTANT:
Ensure good ventilation and 10 cm (3.9 in) of clearance around the chassis for heat dissipation.
•
•
Avoid placing heavy objects on the switch.
To mount the switch on a workbench:
1.
Make sure the workbench is securely grounded and is stable.
2.
Place the switch upside down, and clean the round holes on the bottom of the chassis with a dry
cloth.
3.
Attach the rubber feet to the four round holes on the bottom of the chassis.
4.
Place the switch with right side up on the workbench.
8