- ページ 34

プロジェクター Panasonic PT-AE4000EのPDF 機能説明をオンラインで閲覧またはダウンロードできます。Panasonic PT-AE4000E 50 ページ。 Full high-definition home cinema projector
Panasonic PT-AE4000E にも：取扱説明書 (36 ページ), パンフレット＆スペック (6 ページ), 機能説明 (50 ページ)

ページを印刷する

POSITION menu

WSS

WSS (Wide Screen Signalling) detects if a PAL/

625p (576p)/625i (576i) signal is input and that signal

has an identification signal, and switch the aspect ratio

to required setting automatically. You can switch the

system off manually. (Available with VIDEO/S-VIDEO/

COMPONENT signals only)

OVER SCAN

If the 4 edges of an image is partly dropped, you can

use this function to adjust and project it properly.

Setting range: 0 to +10

OVER SCAN is not available with COMPUTER

signals.

Shrink

34 -

NGLISH

KEYSTONE

If the projector is aligned non-perpendicularly to the

screen, or if the projection screen has an angled

surface, you can correct the keystone vertically.

Enlarge

NOTE:

AUTO SETUP

You can adjust V-POSITION, H-POSITION, DOT

CLOCK and CLOCK PHASE automatically when the

computer signal is detected. Press the ENTER button

to adjust these at the same time.

Image

Setting range: −32 to +32

•

You can correct the distortion ± 30 degrees from the

vertical plane. For a better quality image, installing the

projector with minimum distortion is recommended.

•

Some distortion may be retained for the lens shift

adjustment.

•

The distortion of the main menu screen is not

correctable.

•

The result of the keystone correction will affect the

aspect ratio and the size of the image.

Operation