Panasonic PT-AE4000E Functionele instructies - Pagina 34
Blader online of download pdf Functionele instructies voor {categorie_naam} Panasonic PT-AE4000E. Panasonic PT-AE4000E 50 pagina's. Full high-definition home cinema projector
Ook voor Panasonic PT-AE4000E: Gebruiksaanwijzing (36 pagina's), Brochure & specificaties (6 pagina's), Functionele instructies (50 pagina's)
Pagina afdrukken
POSITION menu
WSS
WSS (Wide Screen Signalling) detects if a PAL/
625p (576p)/625i (576i) signal is input and that signal
has an identification signal, and switch the aspect ratio
to required setting automatically. You can switch the
system off manually. (Available with VIDEO/S-VIDEO/
COMPONENT signals only)
OVER SCAN
If the 4 edges of an image is partly dropped, you can
use this function to adjust and project it properly.
Setting range: 0 to +10
OVER SCAN is not available with COMPUTER
signals.
Shrink
E
34 -
NGLISH
KEYSTONE
If the projector is aligned non-perpendicularly to the
screen, or if the projection screen has an angled
surface, you can correct the keystone vertically.
Enlarge
NOTE:
AUTO SETUP
You can adjust V-POSITION, H-POSITION, DOT
CLOCK and CLOCK PHASE automatically when the
computer signal is detected. Press the ENTER button
to adjust these at the same time.
Image
Setting range: −32 to +32
•
You can correct the distortion ± 30 degrees from the
vertical plane. For a better quality image, installing the
projector with minimum distortion is recommended.
•
Some distortion may be retained for the lens shift
adjustment.
•
The distortion of the main menu screen is not
correctable.
•
The result of the keystone correction will affect the
aspect ratio and the size of the image.
Operation