- ページ 7

水システム DiamondCore Tools CINKのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DiamondCore Tools CINK 14 ページ。 Self-contained system for cleanup of clay, clay water, pottery tools and accessories
DiamondCore Tools CINK にも：ユーザーマニュアル (14 ページ)

ページを印刷する

MAINTENANCE

To maintain The CINK, you will need to empty the 5-gallon clay collection bucket, clean the filter bag and replace the

string filter cartridge periodically. You may also need to winterize or prepare The CINK for periods of unuse. Remem-

ber, as you perform these maintenance steps, small amounts of water may leak out from the system.

Emptying the 5-Gallon Clay Collection Bucket

The 5-gallon bucket is intended to capture most of the clay and slip that will be put into The CINK. You will need to

empty this bucket more frequently than cleaning or replacing the other two filters.

To empty the 5-gallon bucket when it has collected a significant amount of clay:

Unplug the power cord

from the electrical outlet.

Twist counter-clockwise to remove

bucket and lid (keep track of clear

plastic gasket). Pour off water

and remove waste clay.

Turn the upper drain union counter-

clockwise to tighten. Be sure

clear plastic gasket is in place.

Disconnect the 5-gal.

quick disconnects.

Refill the 5-gal. bucket with

fresh water to the fill line.

Reconnect the quick disconnect linking the

5-gal. bucket to the center of the 6.5-gal. bucket.

MAINTENANCE

Disconnect upper drain union

turning clockwise.

Reattach the lid. Make sure it is

seated properly and tight (be

careful not to overtighten). Slide

the bucket under the sink and

align the drainpipe. You may need

to push down on the bucket lid

so the drainpipe will fit.

| 619-905-9400