DiamondCore Tools CINK 사용자 설명서 - 페이지 7
{카테고리_이름} DiamondCore Tools CINK에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DiamondCore Tools CINK 14 페이지. Self-contained system for cleanup of clay, clay water, pottery tools and accessories
DiamondCore Tools CINK에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지)
페이지 인쇄MAINTENANCE
To maintain The CINK, you will need to empty the 5-gallon clay collection bucket, clean the filter bag and replace the
string filter cartridge periodically. You may also need to winterize or prepare The CINK for periods of unuse. Remem-
ber, as you perform these maintenance steps, small amounts of water may leak out from the system.
Emptying the 5-Gallon Clay Collection Bucket
The 5-gallon bucket is intended to capture most of the clay and slip that will be put into The CINK. You will need to
empty this bucket more frequently than cleaning or replacing the other two filters.
To empty the 5-gallon bucket when it has collected a significant amount of clay:
1
Unplug the power cord
from the electrical outlet.
4
Twist counter-clockwise to remove
bucket and lid (keep track of clear
plastic gasket). Pour off water
and remove waste clay.
7
Turn the upper drain union counter-
clockwise to tighten. Be sure
clear plastic gasket is in place.
2
Disconnect the 5-gal.
quick disconnects.
5
Refill the 5-gal. bucket with
fresh water to the fill line.
8
Reconnect the quick disconnect linking the
5-gal. bucket to the center of the 6.5-gal. bucket.
MAINTENANCE
3
Disconnect upper drain union
turning clockwise.
6
Reattach the lid. Make sure it is
seated properly and tight (be
careful not to overtighten). Slide
the bucket under the sink and
align the drainpipe. You may need
to push down on the bucket lid
so the drainpipe will fit.
| 619-905-9400
7