ページを印刷する
Product Operation
Start cleaning
Press the START button on the vacuum
●
cleaner or the ON/OFF button on the
remote control to start cleaning.
Before starting cleaning, make sure the
●
vacuum is not in sleeping mode. If yes,
press the START or ON/OFF button to wake
it up.
The START button doesn't have light in
●
sleeping mode. It turns yellow in standby
mode and turns green when working.
Stop cleaning
When the vacuum cleaner is working, press the START or ON/OFF button to stop it.
●
After stopping it, the START button will turn yellow. And it will turn to sleeping
●
mode if there is no operation in 30 seconds.
Sleeping
When in sleeping mode, press the START or ON/OFF button can wake it up.
●
When in standby mode, long press the START button to turn to sleeping mode.
●
When in standby mode, the vacuum will turn to sleeping mode if there is no
●
operation in 30 seconds.
9
Product Operation
Cleaning Modes
●
Cleaning paths
This vacuum has several cleaning paths, which can automatically switch according
●
to different surface types.
The default mode when starting the vacuum is Auto mode. And it will switch the 4
●
cleaning paths automatically depending on different floor types.
Auto cleaning path
Zig-zag cleaning path
Spot cleaning
In standby mode, press the
button on the remote control and the vacuum will
●
turn to spot cleaning mode.
This mode is suitable for cleaning at a dirtier area. The vacuum will spiral intensively
●
until it finishes cleaning the dirty spot.
Scheduling
In standby mode, press the PLAN button to set the scheduling time
●
Once scheduled, the vacuum will clean at a certain time 7 days a week.
Recharging
When the battery is low, press the
●
the remote control to make it go for recharging.
When it is working and the battery is low, the vacuum will automatically go back to
●
the charging base for recharging.
Edge cleaning path
V cleaning path
button on the vacuum or the
button on
10