- ページ 2

ヒーター Bionaire BCH4267のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bionaire BCH4267 12 ページ。 Twin ceramic heater
Bionaire BCH4267 にも：取扱説明書 (2 ページ), 取扱説明書 (2 ページ)

ページを印刷する

BCH4267

Fig.1

Fig.2

ENGLISH

DESCRIPTION

A. Thermostat Control

B. Selector Control/ Mode

HI (II) LO (I) OFF (O)

C. Power Indicator Light

OPERATING INSTRUCTIONS

Setting the Power Level

1. For heater operation, turn Thermostat Control

(A) to HI (

) (See Fig.2).

2. Turn Selector Control (B) to HI (II) or LO (I).

NOTE: Power Indicator Light (C) will illuminate

when heater is plugged into the mains.

Setting the Thermostat

The thermostat maintains the desired

temperature level by switching on and off.

1. Turn the Thermostat Control all the way to

the right (clockwise) to the maximum

temperature level HI (

2. When the desired temperature is reached,

slowly turn the Temperature Control back

(counter-clockwise) until the heater switches off.

3. The thermostat will now automatically

maintain the pre-set temperature level by

turning the heater ON and OFF.

4. The Power Indicator Light will remain lit to

indicate the heater is in on.

NOTE: It is normal for the heater to cycle ON

and OFF as it maintains the preset temperature.

To prevent the unit from cycling, you need to

change the thermostat setting.

FROST-GUARD SETTING

This special setting will automatically turn on the

heater if the room's temperature reaches freezing.

To set, turn the Thermostat Control all the way to

LO (

), and turn the Selector Control to either

HI (II) or LO (I).

VIZIHEAT™ COLOUR CHANGING DISPLAY

Your heater features the revolutionary technology

and safety of ViziHeat™ Colour Changing Display.

As your heater warms up, parts of, the front grill

will change colour – a visual reminder that the

grill is warm and the heater is on. The exact

timing of the colour change may vary. When the

heater is turned off, the grill will return to its

original colour, thus indicating the grill is cool to

the touch. This may take up to an hour depending

on the environment surrounding the heater and

the cooling down time of the element.

NOTE: If left in extreme cold temperatures (-22°F/

8. Only touch the heater with dry hands.

-30°C) the ViziHeat™ Colour Changing Display

9. DO NOT position where it can be touched by

may not perform. The heater itself will function

normally. Store heater in a cool and dry location.

10.DO NOT use this heater outdoors.

NOTE: The ViziHeat™ colour changing effect

11.Allow a safe area around the heater away

may wear off after continuous, heavy use of the

heater or in time. The heater will continue to

operate normally.

12.Do not use this heater when it is lying on its side.

AUTO SAFETY SHUT-OFF

13.DO NOT use the heater in rooms with

This heater is equipped with a technologically-

advanced, safety system that requires the user

to reset the heater if there is a potential overheat

situation. When a potential overheat temperature

14.DO NOT insert any objects into the heater.

is reached, the system will automatically shut

15.Keep the mains cord at a safe distance from

the heater off. It can only resume operation

when the user resets the unit.

16.If overheating should occur, the built-in

To Reset the Heater:

17.Do not place the cord under a rug.

1. Turn MODE to (O) and Thermostat to HI (

18.The heater is to be installed so that switches

2. Unplug unit, wait 30 minutes.

3. Plug in and turn ON.

Safety Back-Up Fuse

19.Avoid the use of an extension cord because

In the unlikely case the heater does not respond

to an overheat situation, the safety back-up fuse

FOR U.K. AND IRELAND ONLY

will engage. In this case, the heater will not

reset. Please contact your local service number

If the plug is not suitable for the socket outlets in

on the back of the manual for advice.

your home, it can be removed and replaced by a

plug of the correct type. Please refer to

PLEASE READ AND SAVE THESE

IMPORTANT INSTRUCTIONS

"Installation of a plug" below.

Installation of a plug applicable to U.K.

When using electrical appliances, basic safety

and Ireland

precautions should always be taken including

the following:

WARNING - THIS APPLIANCE MUST BE

1. Before connecting the heater, check that the

EARTHED

voltage indicated on the rating plate corresponds

The wires in the mains lead are coloured as such:

to the main voltage in your home/office.

BROWN

2. WARNING: In order to avoid overheating,

BLUE

do not cover the heater

Please note that the colour of these mains wires

3. DO NOT position the heater directly under

may not correspond with the colour markings

a power socket.

that identify the terminals in your plug.

4. Do not use this heater in the immediate

Please proceed as follows:

surroundings of a bath, a shower or

The BROWN coloured wire must be connected

a swimming pool.

to the terminal, which is marked with the letter

5. If the supply cord or plug is damaged, it must

"L" or is coloured RED.

be replaced by the manufacturer or its service

agent or similarly qualified person in order to

avoid hazard. The heater contains no user

serviceable parts. Should the product suffer

damage or breakdown, it must be returned to the

manufacturer or their service agent.

6. Under the environment with electrical fast

transient, the product may malfunction and

require user to reset the product.

7. Do not use this heater with a programmer,

timer or any other device that switches the

heater on automatically, since a fire risk exists if

the heater is covered or positioned incorrectly.

The BLUE coloured wire must be connected to

the terminal, which is marked with the letter "N"

or is coloured BLACK.

children, especially the very young.

NOTE: If the terminals in the plug are not

marked or if you are unsure or in doubt about

the installation of the plug please contact a

from furniture or other objects; at least 50 cm

qualified electrician.

from the top and sides and 200 cm at the front.

If a 13A 3-pin plug is fitted, it must be an ASTA

approved plug, conforming to BS1363 standard.

Replacement 13A fuses must be BSI or ASTA

explosive gas (e.g. petrol) or while using

BS1362 approved.

inflammable glue or solvent (e.g. when gluing

GUARANTEE

or varnishing parquet floors, PVC etc.).

PLEASE KEEP YOUR RECEIPT AS THIS WILL

BE REQUIRED FOR ANY CLAIMS UNDER

the main body of the heater.

THIS GUARANTEE.

• This product is guaranteed for 2 years.

overheating safety device will switch off the heater.

• In the unlikely event of breakdown, please take

it back to the place of purchase, with your till

receipt and a copy of this guarantee.

and other controls cannot be touched by

• The rights and benefits under this guarantee

a person in the bath.

are additional to your statutory rights which

are not affected by this guarantee.

it may cause the heater to overheat.

• The manufacturer undertakes within

the specific period, to repair or replace free of

charge, any part of the appliance found to be

defective provided that:

• We are promptly informed of the defect.

• The appliance has not been altered in any

way or subjected to misuse or repair by a

person other than a person authorised by

the manufacturer.

• No rights are given under this guarantee to a

person acquiring the appliance second hand

or for commercial or communal uses

• Any repaired or replaced appliance will be

- LIVE

guaranteed on these terms for the remaining

- NEUTRAL

portion of the guarantee.

THIS PRODUCT IS MANUFACTURED TO

COMPLY WITH THE E.E.C. DIRECTIVES

73/23/EEC, 89/336/EEC AND 98/37/EEC.

Waste electrical products

should not be disposed of with

Household waste. Please

recycle where facilities exist.

Check on the following website

for further recycling and WEEE

13 amp

information: www.bionaire.com

or e-mail

[email protected]