- ページ 5
スポーツ＆アウトドア ALPHA CHAMP LRT-3のPDF 組立・取扱説明書をオンラインで閲覧またはダウンロードできます。ALPHA CHAMP LRT-3 13 ページ。
ページを印刷する
than 70%. Ensure dry storage conditions with temperatures between 5°C - 45°C (41°F –
113°F).
•
The training room or gym should be well-ventilated (draught during exercising should be
avoided).
•
Please ensure that the installation site has a free safety space in all directions (at least 1
meter [3.28 feet]), and the ceiling height is at least 2,70m (8.86 feet). Make sure that the
device is not blocking possible escape routes or main thoroughfares, respectively.
•
The installation surface has to be flat and solid (any unevenness of the surface has to be
compensated)
•
A protection mat helps to protect high-quality floor coverings from pressure marks and
sweat strains and compensate for uneven surfaces.
•
It is not permitted to put any objects into openings of the device.
•
MAKE SURE THAT ALL RUBBER FEET ARE SOLID CONNECTED TO THE FLOOR.
ESPACIALLY LEFT AND RIGHT LATERAL PARTS HAVE TO HAVE A FIRM
CONNECTION TO THE FLOOR.
ASSEMBLY INSTRUCTIONS AND MAINTENANCE
•
After unpacking, check the delivery note and accompanying documentation to ensure that
all parts have been supplied and are undamaged. In case of complaints please contact
the manufacturer immediately.
•
Some parts can be pre-assembled to facilitate assembly.
•
Assembly of the device has to be performed by adults. In case of doubt use the
assistance of a technically skilled person.
•
Keep children away during assembly as the equipment contains small parts that could be
swallowed.
•
Do not leave any tools, packing material and other refuse lying around as this can
constitute an injury risk and suffocation hazard for children.
•
Perform assembly on a protection mat to avoid damage to the device and scratches to the
floor respectively.
•
Before starting assembly check all parts for completeness having them lying on the floor.
•
Please read these instructions carefully before starting the mounting procedure and follow
the step-by-step instructions provided in the figures carefully and diligently.
•
Do not perform any modifications or improper repairs as this can cause hazards for the
users and no warranty can be claimed
•
Service and repair is only allowed to be performed by authorized service technicians.
Maintenance can be performed by user.
•
Damaged or worn-out components may reduce safety and product lifetime. Therefore
ensure to replace damaged or worn-out components immediately using original spare
parts. In this case contact your contractor and do not use the device until the repair has
been performed.
•
Control that all screws are firmly tightened once a month.
•
To ensure long-term safety of the device we recommend to perform preventive
maintenance by specialists once a year.
2