- ページ 5
緊急電話 Alpha Communications AlphaRefuge 2100 SeriesのPDF 取り付け、使用および配線手順をオンラインで閲覧またはダウンロードできます。Alpha Communications AlphaRefuge 2100 Series 18 ページ。 Area of refuge and rescue assistance system
ページを印刷する
Step 7
Mount the front cover back onto the enclosure.
Programming the Refuge Command Center
Step 8
Programming Options for Refuge Command Center
Option 1 (Factory Default)
The Emergency Phones will call directly offsite and not stop at the Refuge Command Center.
That phone's button will light at the Refuge Command Center during the call.
(Keep in Default Mode if site is not manned 24/7 to answer calls onsite)
Option 2
Program the Refuge Command Center to Allow the Emergency Phones to call it first, then
outside number(s):
(Used when staff are available at certain times to answer calls)
1. Hold down Red Disconnect and Submaster 1 buttons for 5 seconds
2. Release buttons (you will hear a confirmation tone)
3. Press Phone 2 button, then Red button, and then the Phone 1 button
4. Press Submaster 2 button, then Submaster 1 button (you will hear a confirmation tone)
*Note: If you need to restore the Refuge Command Center to Default Mode see page 11.
5