- ページ 4

緊急電話 Alpha Communications AlphaRefuge 2100 SeriesのPDF 取り付け、使用および配線手順をオンラインで閲覧またはダウンロードできます。Alpha Communications AlphaRefuge 2100 Series 18 ページ。 Area of refuge and rescue assistance system

ページを印刷する

Alpha Communications AlphaRefuge 2100 Series 取り付け、使用および配線手順

Wiring Refuge Call Boxes to Refuge Command Center

Step 6

Wire the Refuge Call Boxes to the Reguge Command Center

Refuge Call Box

The Refuge Call Boxes come with a 5' cord with

an RJ11 on both ends. If you received a spade

connector, your company requested it. Wire ac-

cording to your company guidelines.

*Shields from the cabling runs (if used) should be

attached to one of the mounting screws on the

SmartRescue housing.

*Use 22 or 24 AWG 2-pair twisted, shielded cable

between the phones and the SmartRescue. The

maximum communication run is 5,100'

Connecting wire run:

To Refuge Command Center: Insert 4 wires for

each phone as shown below.

To Refuge Call Box: Wire out to a standard

2-pair RJ11 phone jack. Connect this jack to the

5' cord supplied by Alpha.

Refuge Command Center