Alpha Communications AlphaRefuge 2100 Series Instructies voor installatie, gebruik en bedrading - Pagina 4
Blader online of download pdf Instructies voor installatie, gebruik en bedrading voor {categorie_naam} Alpha Communications AlphaRefuge 2100 Series. Alpha Communications AlphaRefuge 2100 Series 18 pagina's. Area of refuge and rescue assistance system
Pagina afdrukken
Wiring Refuge Call Boxes to Refuge Command Center
Step 6
Wire the Refuge Call Boxes to the Reguge Command Center
Refuge Call Box
The Refuge Call Boxes come with a 5' cord with
an RJ11 on both ends. If you received a spade
connector, your company requested it. Wire ac-
cording to your company guidelines.
*Shields from the cabling runs (if used) should be
attached to one of the mounting screws on the
SmartRescue housing.
*Use 22 or 24 AWG 2-pair twisted, shielded cable
between the phones and the SmartRescue. The
maximum communication run is 5,100'
Connecting wire run:
To Refuge Command Center: Insert 4 wires for
each phone as shown below.
To Refuge Call Box: Wire out to a standard
2-pair RJ11 phone jack. Connect this jack to the
5' cord supplied by Alpha.
Refuge Command Center
4