- ページ 3
データロガー Dickson SP125のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dickson SP125 9 ページ。 Temperature data logger
Dickson SP125 にも： マニュアル (3 ページ)
ページを印刷する
Getting Started
•
Install the DicksonWare™ Software.
•
Connect the cable (supplied with the software) to the logger and to a working UBS port on your
computer.
•
Click the Setup button. When the setup window appears, all fields should be automatically filled in,
this will confirm that DicksonWare™ has recognized the logger. Should all fields remain blank, refer to
"No Communication" in the Trouble Shooting section of this manual. Once DicksonWare™ recognizes
the logger, press the Clear button. This will delete all data currently stored.
•
The logger is now sampling and ready for use. The default sample interval is 1 minute. Verify that the
indicator light is flashing every 10 seconds. You may choose to change Default settings for sample
interval and start-date and time. When changing these settings, the logger will automatically go
through the clear process to accept your changes.
•
The LED will flash red when the unit is set-up for delayed start
NOTE: To conserve battery life when storing unit, press the Setup button and select the shortest Sample
Interval and Stop When Full in the Samples section or remove the battery.
DicksonWare™ Software Specifications
•
Microsoft Windows® compatible
•
Allows for simple viewing and zooming of logged data
•
Easy set-up of Dickson Data Loggers including:
•
User selectable sample intervals from 10 seconds to 24 hours
•
Display temperature in °C or °F
•
Delayed logger start times
•
Logger data capacity can be set to wrap data or stop when full
•
Allow for real time monitoring and graphing.
•
Effortless exporting of data and graphs to other software
•
Data can be viewed in tabular (numeric/table) or graphical formats
•
Fast downloading of logged data - 30 seconds (typical) from full logger
•
Even shows battery power status for battery operated loggers
Specifications:
•
Compatible With: Microsoft Windows® 95, 98, 2000, NT & XP
•
PC Requirements: PC w/486MHz or faster microprocessor, 16 MB RAM, 1 free USB root hub, CD
drive, VGA Monitor or better
•
Cable Type/Length: USB male series "A" plug to 5-pin male series "B" mini plug, 6' (2 meters)
•
Computer Interface: USB
•
DicksonWare™ Version Required (minimum): 10.0
Accessories
(for current pricing go to www.dicksondata.com or call 1-800-323-2448)
Software
DicksonWare™ Software and Serial Download Cable
Logger Calibration Software
Calibrations
NIST Traceable Calibration 3-pt (new unit)
NIST Traceable Calibration 1-pt (new unit)
A2LA Accredited Calibration 3-pt. (new unit)
Certificate of Validation
Rev. 04/08
Order #
A016
SW400
N300
N100
N400
N520