ページを印刷する05 Main Menu (Page 3)
The table below shows the relation between power interrupt and duration of
Extended Functions
power application when running "Heater Prot":
Heater Menu
Value Heater Prot
1
2
3
4
5
6
7
8
9
10
3. Power Boost Mode
Main Menu
The Power Boost Mode enables an initial short term high power pulse applied to the
coil. The boost is the value of "Power Limit".
In addition to 3 selectable "initial boost" lengths, further options generate a periodic
boost pulse with different lengths and frequencies.
An "initial boost" is for quick coil heat-up. The periodic boost lets the coil temperature
pass a certain range all the time. In this case different flavors within the liquid—which
develop their taste at different temperatures—can be fully released by the varying
temperature.
We recommend setting the normal power (not the boost) to much lower values when
using the periodic boost because the average power is increased by the boosts and the
temperature cycles through significantly higher ranges.
Extended Functions
Wert Power Boost
Heater Menu
1
2
3
4
5
6
7
8
9
10
Note: If the power setting equals the power limit the boost has no function, as both
values are the same.
For a diagram of the boost operation options, please refer to the document
"Explanations Referring to the Power Boost on dicodes Mods."
On-Time [ms]
Off-Time [ms]
400
100
600
100
110
800
1000
120
1350
150
2000
200
180
2000
150
2000
2000
100
2000
80
Zeit auf Nennleistung
Boostzeit [ms]
[ms]
-
300
-
450
-
600
500
50
600
80
700
120
800
160
900
200
1000
250
1000
300
Powerfactor
0.80
0.86
0.88
0.89
0.90
0.91
0.92
0.93
0.95
0.96
Effektive Leistung
(bei 5W Nennleistung)
Start-Boost
Start-Boost
Start-Boost
6.18
6.53
6.9
7.17
7.36
7.6
8.0
Commented [SC4]: "WERT POWER BOOST" = Power Boost
Setting
BOOSTZEIT = boost time (millisecond)
ZEIT AUF NENNLEISTUNG = time at rated power (duration
EFFEKTIVE LEISTUNG = effective performance (at 5w rated
power)
Commented [SC5]: Where is it located? Website url?