- ページ 15

蒸発器 dicodes Dani Box V2のPDF マニュアルをオンラインで閲覧またはダウンロードできます。dicodes Dani Box V2 18 ページ。

dicodes Dani Box V2 マニュアル
06 Extended Functions Menu
Additional Explanation to several menu items, page 3
The Extended Functions Menu has another sub-menu showing several statistical values.
There are two types of value-counters, either re-settable to zero or not.
The statistic counters are saved whenever the mod is automatically or manually
switched off. In contrast, if the battery is removed from the mod before switching off,
the changes of the counters since the last switching on are lost.
The following statistical values are stored:
- Cycles
- Time
- Energy
- BatCap
- TotCycl
- TotTime "Total Time" is the total time of vaping (not stand by) in a format HHHH:MM
The menu item
between resettable counters and thos which cannot be reset. So it is easier to remember,
which are reset.
Number of puffs. The counter can be reset to 0.
The timespan during which power was applied to the coil, i.e. vaping time.
The counter can be reset to 0.
This is the energy consumption during vape in Joules=Watt-Seconds. This
value is the true integrated vape power over time. It is the power integral,
because during temperature controled vaping (and also in bypass mode)
the power is not constant, but varies a lot over time due to the regulation.
The counter can be reset to 0.
This is a quite interesting counter: If it is reset imemdiately after the insertion
of a fully charged battery, and checked before a new battery is inserted,
it shows the batteries capacity. With this function the user can check,
whether the battery has a capacity as declared by the manufacturer or
whether the battery is wear-out. This counter can be reset to 0.
"Total Cycles" is the number of puffs throughout the entire mod's life.
It cannot be reset.
that is 4digits of hours and 2 for minutes. It cannot be reset.
, i.e the resetting of the counters, is intentionally positioned
Reset Cntr