- ページ 6
蒸発器 dicodes Dani Extreme V2+のPDF マニュアルをオンラインで閲覧またはダウンロードできます。dicodes Dani Extreme V2+ 12 ページ。
dicodes Dani Extreme V2+ にも： マニュアル (12 ページ)
ページを印刷する05 Main Menu (Page 3)
2. Heater Protection Mode (only when Expert Mode=1)
The heater protection mode is a periodic interruption of the application of power to the
coil. The duration and frequency of the interrupts is selected in "Heater Prot" in the
extended functions menu. The repeated power interrupts help to avoid a breaks in
liquid flow and increases in temperature.
The table below shows the relation between power interrupt and duration of
power application when running "Heater Prot" mode:
Value Heater Prot
1
Extended Functions
2
Heater Menu
3
4
5
6
7
8
9
10
3. Power Boost Mode (Only with Expert Mode =1)
Main Menu
The Power Boost Mode enables an initial short term high power pulse applied to the
coil (boost). The boost power is the value of the parameter "Power Limit".
In addition to 3 selectable boost lengths, further options generate a periodic boost pulse
with different lengths and frequencies.
An initial boost is for quick coil heat-up. The periodic boost lets the coil temperature
cycle through optimal temperature ranges. In this case different flavors within the
liquid, which develop their taste at different temperatures, are fully released by the
varying temperature.
We recommend setting the normal power to much lower values when using the
periodic boost because the average power is increased by the boosts and t h e
temperature cycles through significantly higher ranges.
Extended Functions
Wert Power Boost
Heater Menu
1
2
3
4
5
6
7
8
9
10
Note: If the power setting equals the power limit value, the boost has no function
since the values are the same.
For a diagram of boost operation options, see the document "Explanations
referring to the Power Boost on dicodes mods."
On-Time [ms]
Off-Time [ms]
100
400
600
100
800
110
1000
120
1350
150
2000
200
2000
180
2000
150
2000
100
80
2000
Zeit auf Nennleistung
Boostzeit [ms]
[ms]
-
300
-
450
-
600
500
50
600
80
700
120
800
160
900
200
1000
250
1000
300
Powerfactor
0.80
0.86
0.88
0.89
0.90
0.91
0.92
0.93
0.95
0.96
Effektive Leistung
(bei 5W Nennleistung)
Start-Boost
Start-Boost
Start-Boost
6.18
6.53
6.9
7.17
7.36
7.6
8.0
Commented [SC1]: The following chart has its headings in
GERMAN/
Commented [SC2]: LOCATION? WEBSITE?