- ページ 9

ケーブルとコネクター Alpha MED Scientific MED64 MED-C11のPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。Alpha MED Scientific MED64 MED-C11 20 ページ。 Med multi-well connector

3. Instruction for use

3-1. Installing the MED Multi-well Probe onto the MED Multi-well

Connector

1. Clean the MED Multi-well Probe with kimwipe soaked with 70% ethanol before sliding into the

Connector.

•

The leads in the MED Multi-well Probe contact with gold pins of the MED Multi-well Connector.

(Refer to Figure 15 in the page 11) Salt residue, or even finger print can cause the contact

pins to rust or accumulate residue build up.

2. Slide in the MED Multi-well Probe (the side with the terminals) gently and horizontally to the Probe

port. Firmly press to make a secure connection.

CAUTION:

•

Spilling liquid onto the pins will cause rust and adversely affect conduction. Be extremely careful

not to get the pins wet, especially with saline solution.

Figure 7. MED Multi-well Probe (MED-5N811) with its terminals on the top (left) and installing the MED Multi-well

Probe onto the MED Multi-well Connector (right).

Figure 8. MED Multi-welll Connector where Probe is installed.

Product Manual - MED Multi-well Connector (MED-C11)

3. Instruction for use