- ページ 3
サーバー Axis 200+のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Axis 200+ 6 ページ。 Axis communications webcam
Axis 200+ にも： 技術仕様 (2 ページ)
ページを印刷する
UNIX
Type the following commands:
arp -s <Internet address> <Ethernet address> temp
ping <Internet address>
Example:
arp -s 192.168.3.191 00:40:8c:10:00:86 temp
ping 192.168.3.191
6. Access the AXIS 200+ by entering its Internet address (URL) into
the location field of your Web browser.
Example:
http://192.168.3.191/
7. The AXIS 200+ is delivered in approximate focus position, with
focus set to infinity. If you need to fine adjust to close focus,
carefully turn the smaller lens. If you cannot obtain a sharp
picture, loosen the lock ring and bring the camera into focus by
turning the larger lens. Tighten the lock ring afterwards. Reload
your Web browser to test your adjustments.
The installation is complete and you can now include snapshots
taken by the camera into your own applications.
Taking Snapshots
To trigger a camera snapshot, simply enter the URL of your camera
into the location field of your Web browser.
These snapshot types are available within the AXIS 200+:
File name
fullsize.jpg
halfsize.jpg
lastshot.jpg
hugesize.jpg
zoom.jpg
Size
Description
(pixels)
352 x 288
Full size JPEG snapshot. Generation
30 kbytes
time = 0.5 sec
176 x 144
Half size JPEG snapshot. Generation
15 kbytes
time = 0.3 sec
352 x 288
The last snapshot taken by the
or
camera, either "full size" or "half
176 x 144
size".
704 x 576
The highest resolution snapshot
available. As opposed to the 'fullsize'
and 'halfsize' images, this type of
snapshot is software generated.
Generation time = 18 sec
352 x 288
Derived from the from the center of
'hugesize'. Generation time = 8 sec