- ページ 2

サーバー Axis 200+のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Axis 200+ 6 ページ。 Axis communications webcam
Axis 200+ にも：技術仕様 (2 ページ)

Quick Installation Guide

This guide covers the installation and basic setup procedures for your

AXIS 200+. Should you require more detailed instructions, please

refer to the AXIS 200+ User's Manual available via the Axis WWW

Home Page at http://www.axis.com/salessupport/manuals.html, or

http://www.se.axis.com/products/documentation/manuals.html

Control Snapshot

button

Installing the

Follow these instructions to install your AXIS 200+:

1. Record the serial number of your AXIS 200+. Please note that the

serial number is identical to the Ethernet address of the unit.

2. Connect your AXIS 200+ to the network using an Ethernet

10baseT connector.

3. Connect the external power supply (Axis type PS-D), to the

AXIS 200+ and check that the Power indicator is lit.

4. Acquire an unused Internet address for your AXIS 200+.

5. Assign the Internet address to your AXIS 200+ using the method

appropriate for your network environment as detailed below:

Windows 95, Windows NT

Start a DOS window and type the following commands:

arp -s <Internet address> <Ethernet address>

ping <Internet address>

Example:

arp -s 192.168.3.191 00-40-8c-10-00-86

ping 192.168.3.191

When using the Windows 95 implementation of ARP you must

first, if you have an empty ARP table (seen with

existing unit on your network before setting the Internet address.

Camera lens

indicator

Front view

Power

Ethernet

supply

10baseT

AXIS 200+

CS ring

RS232 I/O

Lock ring

Net indicator

Power indicator

), ping an

arp -a