- ページ 11

コントローラー Epever LS1024EのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Epever LS1024E 20 ページ。 Solar charge controller
Epever LS1024E にも：マニュアル (2 ページ)

 Load Work Mode Setting

When the controller is powered on, press the setting button to control

the load output. Press the button once, the ON/OFF status will be

changed corresponding.

 Battery Type Setting

Press the setting button for more than 5 seconds, battery indicator

LED1, LED2, LED3 will be flashing correspondingly. Then press the

setting button to choose Sealed, Gel, and Flooded battery type, when

you finish choosing, stop pressing the button, the setting is finished till

the digital tube stop flashing. The parameters indicated are shown

below:

Battery type selection

LED1

○

"○"LED indicator on

LED2

LED3

○

Sealed lead acid battery

○

"×"LED indicator off

Table4-4

Battery type

Gel battery

Flooded battery