Epever LS1024E 사용자 설명서 - 페이지 11

{카테고리_이름} Epever LS1024E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epever LS1024E 20 페이지. Solar charge controller
Epever LS1024E에 대해서도 마찬가지입니다: 매뉴얼 (2 페이지)

Epever LS1024E 사용자 설명서

4.2 Setting Operation

 Load Work Mode Setting
When the controller is powered on, press the setting button to control
the load output. Press the button once, the ON/OFF status will be
changed corresponding.
 Battery Type Setting
Press the setting button for more than 5 seconds, battery indicator
LED1, LED2, LED3 will be flashing correspondingly. Then press the
setting button to choose Sealed, Gel, and Flooded battery type, when
you finish choosing, stop pressing the button, the setting is finished till
the digital tube stop flashing. The parameters indicated are shown
below:
Battery type selection
LED1
"○"LED indicator on
LED2
LED3
×
×
Sealed lead acid battery
×
"×"LED indicator off
7
Table4-4
Battery type
Gel battery
Flooded battery