- ページ 7
自動車バッテリー充電器 DieHard Portable Power 950のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DieHard Portable Power 950 9 ページ。 12v dc power source and jump starter
DieHard Portable Power 950 にも： 取扱説明書 (9 ページ), オーナーズマニュアル (9 ページ), 取扱説明書 (13 ページ), 取扱説明書 (7 ページ)
ページを印刷する
12V DC Electrical
Device
Run=Time
Chart
Appliance
Type
Estimated
Power
Estimated
Time*
Fluorescent
Lights, Cellular Phones
4 Watts
40 Hours
Radios, Depth Finders,
Fans
9 Watts
21 Hours
Camcorders,
DVD Players,
Spotlights
15 Watts
12 Hours
Electrical
Tools, Bilge Pumps
24 Watts
7 Hours
Electric Coolers
48 Watts
3 Hours
Air Compressors,
Car Vacuums
80 Watts
1.5 Hour
*NOTE: Estimated run-times. Actual time may vary. Times are based on
the internal battery being new, fully charged and operated at room tem-
perature.
The USB port on the 950 provides up to 500mA at 5VDC
7.1
Turn the JUMP START ON/OFF switch to the ON position.
7.2
Plug the device into the USB port on the front panel of the 950.
7.3
Turn USB device ON.
7.4
Reverse these steps when finished using the USB port.
8.1
Position the 950 on a flat, stable surface near the intended work area.
8.2
Push the power switch to the LIGHT position. The light will turn on and
illuminate your work area.
NOTE: With a fully charged internal battery, the built-in light should pro-
vide 18 to 30 hours of continuous, useful light.
8.3
Push power switch to the OFF position when work is completed.
8.4
Charge the 950 as soon as possible after using the buitt-in light.
The 950 is equipped with a built in door, located on the back of the unit, to
make replacing the internal battery easy and efficient.
To order a replacement battery, call: 1-800-SEARS-64
9.1
Be sure that all switches are in the OFF position.
9.2
Remove clamps from storage pegs on the back of the 950.
9.3
Remove eight screws from the door.
9.4
Slide door out.
.5.