- ページ 2
デジタルカメラ Olympus CAMEDIA E-100 RSのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Olympus CAMEDIA E-100 RS 2 ページ。 E-100rs guide rapide de d謡rrage (fran栩s)
Olympus CAMEDIA E-100 RS にも： 接続マニュアル (9 ページ), ソフトウェア・インストール・マニュアル (2 ページ), トラブルシューティング (3 ページ), (クイック・スタート・ガイド (2 ページ), (フランス語)迅速な操作マニュアル (2 ページ)
ページを印刷する
http://www.olympus-europa.com
2
Taking pictures
Taking still pictures
1. Set the Mode dial to P.
2. Compose the picture by turning the
camera towards the subject and centering
the AF target mark on the image you want
to shoot.
Press
(Monitor button) to select whether to
display your image on the Monitor or the Viewfinder.
[To enlarge your subject]
Press the Zoom lever toward "T" to enlarge your subject. To return to normal
magnification, press the Zoom lever back toward "W".
3. Press the Shutter button halfway to focus.
The AF confirmation mark lights up in green in the
upper left corner and the camera beeps. Focus
and exposure (shutter speed/aperture) become
locked.
If the AF confirmation mark blinks, then the camera
is out of focus. If this happens, release the Shutter
button and move the AF target mark slightly. Then,
press the shutter button halfway again.
4. Press the Shutter button fully to take a
picture.
The free part of the memory gauge lights up and
the card access lamp blinks while the picture is
being recorded.
Continuous shooting is available even if the card
access lamp is blinking, unless the entire memory
gauge is lit.
Memory gauge
If you are taking a picture in a dark environment,
the built-in flash will fire automatically if it has been
popped up.
Taking movie pictures
1. Set the Mode dial to
.
The maximum available recording time appears on the Viewfinder.
2. Press the Shutter button fully to start movie recording and press it
again fully to stop.
The card access lamp blinks while the picture is being recorded.
Continuous shooting is available when the card access lamp stops blinking.
Quick-Start Guide
Control panel indications
Full-time AF
Viewfinder
Exposure
P F2.8 1/30
0.0
compensation
AF system
[
SM
]
Manual focus
AF target mark
Metering mode
Stabilizer
Press
Press
halfway
fully
3
AF confirmation mark
Playing back pictures
P F2.8 1/30
0.0
[
SM
]
Set the Mode dial to
The last picture taken is played back.
AF target mark
● Use the Arrow pad to select the desired picture for display.
: Displays next picture.
: Displays preceding picture.
: Jumps to the picture 10 frames ahead.
: Jumps to the picture 10 frames behind.
P F2.8 1/30
0.0
[
SM
]
* Press the Zoom lever toward "W" to display multiple
pictures at the same time (Index-display).
* Press the Zoom lever toward "T" to display a close-up.
[Movie pictures]
Card access
will appear with pictures that can be played back as movies.
lamp
(1) Press
(Menu button) to display the Menu.
(2) Select "MOVIE PLAY" and press
(3) When "START" appears, press the OK button.
The card access lamp blinks for a moment, then the movie starts.
(4) Press
when you are finished watching. The Menu reappears. Press
exit the Menu.
Flash intensity control
Slow shutter
Card error
synchronization flash
Card writing
Flash mode
Sound
Auto
Battery check
Macro mode
record
bracket
White balance
Self-timer/
Remote control
ISO
Number of storable
still pictures
AE memory
Seconds that movies
can be shot
Pre-capture
Card
Record mode
Sequential shooting
.
x10
23.12. , 00 21:56
[
SM
]
Still picture display (1-frame)
Arrow pad
1234
1235
1237
1238
1240
1241
Index-display
on the Arrow pad.
(Hotline Numbers)
Tel. 01805-67 10 83
for Germany
Tel. 00800-67 10 83 00
for Austria, Belgium, Denmark, France, Netherlands, Norway, Sweden,
Switzerland, United Kingdom
Tel. +49 180 5-67 10 83
for Finland, Italy, Luxemburg, Portugal, Spain, Czech Republic
Tel. +49 40-237 73 899
for Greece, Croatia, Hungaria and the Rest of Europe
Our Hotline is available from 9 am to 6 pm (Monday to Friday)
(E-Mail) [email protected]
● Use the Arrow pad to select the desired picture for display.
: Plays movie pictures when held down continuously.
: Plays movie pictures in reverse when held down
continuously.
: Jumps to the beginning of the movie.
: Jumps to the end of the movie.
● Press OK to pause the movie.
4
Erasing pictures
Unwanted images can be erased. You can erase one frame or all frames,
depending on your requirements.
To erase an unwanted image, first display it on the screen as described
in "
Displaying pictures" on this page.
3
1-frame erase
Press
(Erase button) on the camera and
select "YES" on the confirmation screen using
the Arrow pad. Then, press OK.
All-frame erase
Press
, then select "CARD SETUP"—"
OK. Select "YES" on the confirmation screen, then press OK again.
(To cancel, select "NO", then press OK.)
HQ
CARD SETUP
MODE SETUP
10
[
]
[
SM
]
2 / 2
Erasing a still picture
5
1236
Turning off the power
1239
1242
When you are finished using the camera, turn the power off after
checking that the card access lamp is not on.
● The picture on the screen will disappear when you turn the power off.
● If no operation is performed for 1 minute or more, the image on the screen goes off
automatically to avoid battery exhaustion (this function is called Sleep). To end Sleep,
perform any operation on your camera.
● When you store the camera, make sure to put the lens cap on.
again to
SM/CF
MOVIE PLAY
START
COPY
[
SM
]
[
1 / 2
]
YES
NO
[
SM
]
YES
OK
NO
Confirmation screen
" using the Arrow pad. Press
[
SM
]
YES
NO
YES
OK
NO
Confirmation screen
Printed in Japan