- ページ 32
顕微鏡 Olympus BX51のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Olympus BX51 40 ページ。 System
Olympus BX51 にも： 取扱説明書 (17 ページ), 取扱説明書 (34 ページ), 取扱説明書 (37 ページ), 取扱説明書 (11 ページ)
ページを印刷する
ASSEMBLY
7-1 Assembly Diagram
The diagram below shows the sequence of assembly of the various modules. The numbers indicate the order of
assembly.
The BX51TRF microscope frame is assembled in the same procedures as the BX51TF frame.
The module numbers shown in the following diagram are merely the typical examples. For the modules with which the
module numbers are not given, please consult your Olympus representative or the catalogues.
# When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching any
parts or touching glass surfaces.
Assembly steps enclosed in
}Most assembly operations are possible by using the Allen screwdriver (
However, the assembly of the reflected light illuminator requires the use of the provided Allen wrench (
the internal screws (to ensure the performance, we recommend that you have your Olympus representative assemble or
remove this module).
Specimen holder
U-HLDT-4
U-HRDT-4
U-HLST-4
Stage clamping
knob
Stage
U-SVRB-4
U-SVLB-4
U-SRG
28
will be detailed on the subsequent pages.
Eyepiece
WHN10X (FN 22)
WHN10X-H (FN 22)
35WHN10X (FN 22)
SWH10X-H (FN 26.5)
35SWH10X (FN 26.5)
Revolving nosepiece
U-5RE-2
U-D6RE
U-D7RE
U-P6RE
UIS2/UIS
series
objective
Specimen holder
clamping knobs
Condenser
U-AC2
Condenser clamping
U-SC3
knob
U-AAC
U-ULC-2
U-UCD8
Reflected light illuminator
BX-URA2
BX-RFA
Observation tube
BX-RLA2
U-BI30-2 (FN 22)
U-TR30-2 (FN 22)
U-TR30NIR (FN 22)
U-TBI3 (FN 22)
U-SWTR-3 (FN 26.5)
U-ETBI (FN 22)
U-TTBI (FN 22)
Intermediate
attachment
U-EPA2
U-DO3
U-TRU, etc.
Tube clamping
screw
Revolving nosepiece
clamping screw
Microscope frame
BX51TF
Lamp socket
clamping screw
) provided with the microscope.
) for clamping
Reflected
lamp
housing
Microscope frame
BX51TRF
Power cord
100 W halogen
lamp housing
U-LH100-3
100 W halogen bulb
12V100WHAL-L
12V50WHAL-L