- ページ 23

カメラアクセサリー Olympus PFL-E01のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Olympus PFL-E01 29 ページ。 Electronic flash waterproof case for the fl-36

6. Maintaining the Waterproof Function

Open the Case and remove the O-ring from the Case.

Removal of the O-ring

Insert the O-ring removal pick between the O-ring and the wall of the O-ring groove.

Move the tip of the inserted pick under the O-ring. (Take care not to damage the O-ring

groove with the tip of the pick.)

Hold the O-ring with your fingertips after it has come out of the groove and remove it from

the Case.

After visually checking that dirt has been removed from the O-ring, checking for attached

sand and other foreign matter, as well as for damage and cracks can be done by squeezing

the entire circumference of the O-ring lightly with your fingertips.

Use a lint-free clean cloth or cotton swab to remove the foreign matter attached to the O-

ring groove. Also, remove any sand or dust from the O-ring contact surface on the Case.

CAUTION

：• When a mechanical pencil or a similar other sharp object is used to remove the O-

• When the O-ring is checked with the fingertips, take care not to stretch the O-

• Never use alcohol, thinner, benzene or similar solvents or chemicals detergents

ring or to clean the inside of the O-ring groove, the Case and the O-ring may be

damaged and water leakage may be caused.

ring.

to clean the O-ring. When such chemicals are used, it is likely that the O-ring will

be damaged or that its deterioration will be accelerated.

E-21