- ページ 20

医療機器 Olympus OEP-5のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Olympus OEP-5 40 ページ。 Color video printer

ページを印刷する

3.3 Setup of Connected Equipment

This document, "INSTRUCTIONS (BASIC)," explains

the EVIS EXERA II video system center (CV-180).

Refer to the instruction manuals of the connected

equipment, which must be set up as required for use with

this instrument.

Refer to "INSTRUCTIONS (ADVANCED)" when you

use equipment other than the equipment introduced in

"INSTRUCTIONS (BASIC)."

Table 3.1

Connected Device Instruction Manual

CV-180

3.3 Setup of Connected Equipment

Setup Item

References

"9.2 System setup"

"Type"

"Printer"

"Qty. "N""

"Caption"

"Release Time"

"OEP4 mode"

"9.3 User preset"

"Scope switch"

"Remote switch and foot

switch (EXERA and

VISERA)"

"Foot switch"

"9.3 User preset"

"Release setting"

"Release function"

"Release1"

"Release2"

Setup

"OEP4"

"4" – " 9"

Max. 32 characters.

"0.5sec" "1sec"

"1.5sec" "2sec"

"Mode1" "Mode2"

"Release1"

"Switch1"

"Release2"

"Switch2"

"Switch3"

"Switch4"

"Switch1"

"Switch2"

"CVP"

Note

Select the printer type. Be sure to

set "Type" to "OEP4" when using

this instrument.

Select the print quantity when the

"Print quantity indicator" on the

keyboard is set to "N." Select any

setting, as required.

Input the characters to be printed

in the margin of print sheet.

Set the time while still images

from the endoscope are captured

before the images are read by the

printer.

Select the output signal format

for the endoscope image. Select

"Mode1" when HDTV signals

are input.

Select the function to be

controlled from the scope switch

and foot switch on the camera

head. Select any setting, as

required.

Select the instrument to be

controlled from "Release1" and

"Release2" that are assigned to

the scope switch and foot switch

on the camera head. Be sure to set

this item to "CVP" when using

this instrument. The RELEASE

key of the keyboard provides the

same function as "Release1."