Olympus OEP-5 Manual de instruções - Página 20
Procurar online ou descarregar pdf Manual de instruções para Equipamento médico Olympus OEP-5. Olympus OEP-5 40 páginas. Color video printer
Imprimir página
3.3 Setup of Connected Equipment
This document, "INSTRUCTIONS (BASIC)," explains
the EVIS EXERA II video system center (CV-180).
Refer to the instruction manuals of the connected
equipment, which must be set up as required for use with
this instrument.
Refer to "INSTRUCTIONS (ADVANCED)" when you
use equipment other than the equipment introduced in
"INSTRUCTIONS (BASIC)."
Table 3.1
Connected Device Instruction Manual
CV-180
3
20
3.3 Setup of Connected Equipment
Setup Item
References
"9.2 System setup"
"Type"
"Printer"
"Qty. "N""
"Caption"
"Release Time"
"OEP4 mode"
"9.3 User preset"
"Scope switch"
"Remote switch and foot
switch (EXERA and
VISERA)"
"Foot switch"
"9.3 User preset"
"Release setting"
"Release function"
"Release1"
"Release2"
Setup
"OEP4"
"4" – " 9"
Max. 32 characters.
"0.5sec" "1sec"
"1.5sec" "2sec"
"Mode1" "Mode2"
"Release1"
"Switch1"
"Release2"
"Switch2"
"Switch3"
"Switch4"
"Switch1"
"Switch2"
"CVP"
Note
Select the printer type. Be sure to
set "Type" to "OEP4" when using
this instrument.
Select the print quantity when the
"Print quantity indicator" on the
keyboard is set to "N." Select any
setting, as required.
Input the characters to be printed
in the margin of print sheet.
Set the time while still images
from the endoscope are captured
before the images are read by the
printer.
Select the output signal format
for the endoscope image. Select
"Mode1" when HDTV signals
are input.
Select the function to be
controlled from the scope switch
and foot switch on the camera
head. Select any setting, as
required.
Select the instrument to be
controlled from "Release1" and
"Release2" that are assigned to
the scope switch and foot switch
on the camera head. Be sure to set
this item to "CVP" when using
this instrument. The RELEASE
key of the keyboard provides the
same function as "Release1."