- ページ 2

計測機器 AccuMASTER 7434のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AccuMASTER 7434 2 ページ。 Digital angle gauge
AccuMASTER 7434 にも：ユーザーマニュアル (2 ページ)

ページを印刷する

With the AccuMASTER 2-in-1 Digital

Level and Angle Gauge you can find true

level and precisely check angles on saw

blades, jointer fences, drill press and

band saw tables, bevels and many more

precision tools. The AccuMASTER is

also useful for welders, fabricators,

installers or anyone who needs to find

true level and precise angle settings.

• Accuracy: ±0.2°

• Large, bright StayGlow™ display

stays on as long as you're using it

• Magnetically attaches to blades,

tables and more

• Finds both true level and

relative angles

• Reversible display (reads

upside down)

• IP54 certified – dust and water

resistant

• INCLUDES: 2-year warranty, 2

long-life AAA batteries and a

protective pouch

The LCD Display

All manuals and user guides at all-guides.com

Correct

Operation

1. Remove plastic battery tab before

2. Press ON/OFF button to power the

3. To measure an angle, turn on and

4. Press MODE to switch between

5. If a surface isn't level, but you want

6. If you need to move the device to

IGITAL

NGLE

use. Two AAA batteries are included.

device. The display backlight stays

on until the device is turned off.

Press and hold ON/OFF button to

turn off. The device will turn off

after 3 minutes of inactivity.

put the device on the surface

being measured.

degrees, %, mm/m or in/ft.

it to be your level starting point, you

can manually set it to 0° by pressing

SET 0. The

icon will display. Press

SET 0 again to cancel the function.

read the display, press the HOLD

button to freeze the measurement.

The

icon will display. Press HOLD

again to return to measuring mode.

HOLD – save measurement

MODE – shows degrees, %, IN/FT, mm/m

Indicates tilt direction

SET O – set current level to 0°

Battery life

AUGE

Incorrect*

*If the angle gauge is

tipped back more

than 45 degrees, the

display will show Err.