AccuMASTER 7434 User Manual - Page 2
Browse online or download pdf User Manual for Measuring Instruments AccuMASTER 7434. AccuMASTER 7434 2 pages. Digital angle gauge
Also for AccuMASTER 7434: User Manual (2 pages)
Print Page
With the AccuMASTER 2-in-1 Digital
Level and Angle Gauge you can find true
level and precisely check angles on saw
blades, jointer fences, drill press and
band saw tables, bevels and many more
precision tools. The AccuMASTER is
also useful for welders, fabricators,
installers or anyone who needs to find
true level and precise angle settings.
• Accuracy: ±0.2°
• Large, bright StayGlow™ display
stays on as long as you're using it
• Magnetically attaches to blades,
tables and more
• Finds both true level and
relative angles
• Reversible display (reads
upside down)
• IP54 certified – dust and water
resistant
• INCLUDES: 2-year warranty, 2
long-life AAA batteries and a
protective pouch
The LCD Display
Ã
À
All manuals and user guides at all-guides.com
D
Correct
Operation
1. Remove plastic battery tab before
2. Press ON/OFF button to power the
3. To measure an angle, turn on and
4. Press MODE to switch between
5. If a surface isn't level, but you want
6. If you need to move the device to
À
Õ
Œ
À
Ã
Õ
Œ
A
IGITAL
NGLE
use. Two AAA batteries are included.
device. The display backlight stays
on until the device is turned off.
Press and hold ON/OFF button to
turn off. The device will turn off
after 3 minutes of inactivity.
put the device on the surface
being measured.
degrees, %, mm/m or in/ft.
it to be your level starting point, you
can manually set it to 0° by pressing
SET 0. The
icon will display. Press
SET 0 again to cancel the function.
read the display, press the HOLD
button to freeze the measurement.
The
icon will display. Press HOLD
again to return to measuring mode.
HOLD – save measurement
MODE – shows degrees, %, IN/FT, mm/m
Indicates tilt direction
SET O – set current level to 0°
Battery life
G
AUGE
Incorrect*
*If the angle gauge is
tipped back more
than 45 degrees, the
display will show Err.