- ページ 5

電動工具 Axminster 109540のPDF オリジナル取扱説明書をオンラインで閲覧またはダウンロードできます。Axminster 109540 6 ページ。 Drill press table

3.3 ASSEMBLING THE STOP BLOCK

1. Place the M6x40 bolt (part 1) though the stop block (part 2) and washer (part 3). Loosely thread

the stop block knob (part 4) onto the bolt.

2. Slide the bolt through the T track on the fence (part 1) such that the bottom of the stop block (part

2) lies against the top of the table (part 3).

3. Slide the stop block to the desired position and lock it in place by fully tightening the knob.

3.4 ASSEMBLING THE HOLD DOWN CLAMPS

The drill press table comes with two hold down clamps, which can be used to clamp

down a workpiece to the drill press table.

1. Assemble the hold down clamps in the same order

as the clamp assemblies under the table.

2. Slide the bolts of the hold down clamps ( part1) into

the top T-slots on top of the table (part 2).

3. Place the workpiece on the drill press table and

clamp it down by tightening the knobs. Make sure the

clamp bushings are seated properly in the clamps.

4. DIAGRAM AND PART LIST

Part No.

Description

Fence

Bolt M8x70

Stop Block

Bolt M6x40

Triangle Knob

Washer 6x18x1.2

Clamp

Clamp Bushing

Bolt M8x90

Flower Knob

Washer 8x20x1.5

Table

Table Insert

Qty