- ページ 15

血圧モニター AccuMed ABP801BのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AccuMed ABP801B 15 ページ。 Wrist blood pressure monitor

applicable RF compliance level above, the MODEL ABP801 should be observed to verify normal operation. If

abnormal performance is observed, additional measures may be necessary, such as re-orienting or relocating the

MODEL ABP801.

b. Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.

portable and mobile RF communications equipment and the MODEL ABP801

The MODEL ABP801 is intended for use in an electromagnetic environment in which radiated

RF disturbances are controlled. The customer or the user of the MODEL ABP801 can help

prevent electromagnetic interference by maintaining a minimum distance between portable

and mobile RF communications equipment (transmitters) and the MODEL ABP801 as

recommended below, according to the maximum output power of the communications

equipment.

Rated

maximum

output power

of transmitter

0.01

0.1

100

For transmitters rated at a maximum output power not listed above, the recommended

separation distance d in meters (m) can be estimated using the equation applicable to the

frequency of the transmitter, where P is the maximum output power rating of the transmitter in

watts (W) according to the transmitter manufacturer.

NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range

applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is

affected by absorption and reflection from structures, objects and people.

Recommended separation distances between

Separation distance according to frequency of transmitter m

150 kHz to 80 MHz

0.12

0.38

1.2

3.8

80 MHz to 800 MHz

0.12

0.38

1.2

3.8

800 MHz to 2.5 GHz

0.23

0.73

2.3

7.3