- ページ 7
スクラバー AXMINSTER WORKSHOP AW37EのPDF オリジナル取扱説明書をオンラインで閲覧またはダウンロードできます。AXMINSTER WORKSHOP AW37E 17 ページ。 1hp extractor
ページを印刷するStep 3
• Locate the outlet duct and gasket (C) assembly and
remove the bolts nuts and washers.
Step 4
• Position the rubber gasket onto the fan's outlet housing
and secure the outlet duct assembly (C) over the housing
using the bolts nuts and washers you removed earlier.
C
Gasket
• Remove the two thread bolts on the handle (F). Line
up the holes with the pre-drilled holes to the rear of
C
the fan housing and secure in position with the two
bolts.
Phillips screw
• Locate the inlet grill (D) and remove the three
Phillips screws from around the inlet duct.
7
ASSEMBLY
Step 5
F
Step 6
D
Continues Over...