AXMINSTER WORKSHOP AW37E 원본 사용 설명서 - 페이지 7

{카테고리_이름} AXMINSTER WORKSHOP AW37E에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AXMINSTER WORKSHOP AW37E 17 페이지. 1hp extractor

Step 3

• Locate the outlet duct and gasket (C) assembly and

remove the bolts nuts and washers.

Step 4

• Position the rubber gasket onto the fan's outlet housing

and secure the outlet duct assembly (C) over the housing

using the bolts nuts and washers you removed earlier.

Gasket

• Remove the two thread bolts on the handle (F). Line

up the holes with the pre-drilled holes to the rear of

the fan housing and secure in position with the two

bolts.

Phillips screw

• Locate the inlet grill (D) and remove the three

Phillips screws from around the inlet duct.

ASSEMBLY

Step 5

Step 6

Continues Over...