- ページ 4

インターホン・システム Alphatech Fermax Cityline v2のPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Alphatech Fermax Cityline v2 7 ページ。 Sip doorphone station



In order for backlight and to power an electrical lock, a 12VDC/1A power supply is required.

Refer to the figure below, point 11. The doorphone can be also PoE powered according to

IEEE802.3af norm. A low consumption el. lock (max. 220mA) can be used with PoE.



There are two options to control external devices e.g. Lock, Light, Bell. Either NO (Normally

Open) or NC (Normally Closed). Refer to the figure below, points 9 and 10.



Point 5, DIP switch 2, normally in down position. If you move it up, the doorphone goes to a

rescue mode, default IP 192.168.1.250, access via a web browser with user name: admin,

password: 1234. Always disconnect the ETH port and the power supply before going to the

rescue mode or before going to normal mode (i.e. DIP switch 2 up or down). DIP switch 1 is

for service purposes only, do not use it.

LPHATECH

ECHNOLOGIES

Jeremenkova 88, Praha 4, Czech Republic

www.alphatechtechnologies.cz

s.r.o