- ページ 4

自転車 Circe Cycles HeliosのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Circe Cycles Helios 12 ページ。 Separable tandem
Circe Cycles Helios にも：組立マニュアル (8 ページ), オーナーズマニュアル (15 ページ)

ページを印刷する

2.0 Transporting your tandem

Depending on the method of transport the Helios separable tandem can be packed in a number of ways. For full protection,

suitable for air travel, we recommend either the one or two case system. For partial protection , suitable for car, boat or train

travel, we recommend using two soft bags.

2.1 One case system using the Traveller case

The one case system allows the whole tandem to go into one case and, depending on configuration, will also take the

optional Traveller Trailer Kit.

Restrictions

- Mudguards need to be removed

- Only certain pannier racks will fit in the case, racks need to be removed for packing.

- Ursus Jumbo stand has to be removed (Pletscher twin leg stand can be left on)

- Some bar configurations may be problematic.

Necessary tools

- 4, 5 and 6 mm allen key

- Pedal spanner

- Long nose pliers

2.11 Disassembly

Step 2.

Remove the captain seatpost, release the brakes

(applies to V brakes only) and turn the bike upside

down. Remove the wheels and skewers (for hub gears

follow the dedicated manufacturers' instructions for

wheel removal). Install the chain keeper into R/H rear

dropout as shown to hold the drive chain in place.

Release all the zip ties so the the cables are no longer

attached to the frame, this can be done with the end

of your finger nail or a small flat screwdriver.

Step 1.

Prepare your tandem for packing by removing the

pedals and ensuring the drive chain is in the smallest

sprocket at the rear (for derailleur gear system) for

hub gears ensure it is in the lowest gear with the least

cable tension.

Page 3