- ページ 7

電動工具 Arcan CP400WのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Arcan CP400W 16 ページ。 40 ton manual shop press with winch

PUMP AND RAM ASSEMBLY INSTRUCTIONS

This end up

CP400W Operation Manual

Note: Handle ram carefully to avoid damage to gauge or gauge face.

Do not disconnect hoses prior to assembly.

Note: There are two sets of holes for bolts.

Use centermost holes on the side.

Note: Allow ram to rest on press

bed while installing pump.

Ram bolts directly to press frame using 4 of the 10 bolts included

with the press (one bolt, one washer and one nut for each corner

of the ram and for each of four holes in the press frame).

Attach bolts to opposite corners ﬁrst. Hand tighten.

Wrench tighten after all four bolts have been tightened.

Top of press frame, looking down

Note: Hose must run BEHIND frame.

Inside of press frame,

looking up