Arcan CP400W Manual de instruções de montagem - Página 7

Procurar online ou descarregar pdf Manual de instruções de montagem para Ferramenta eléctrica Arcan CP400W. Arcan CP400W 16 páginas. 40 ton manual shop press with winch

PUMP AND RAM ASSEMBLY INSTRUCTIONS
8
A
This end up
B
This end up
CP400W Operation Manual
Note: Handle ram carefully to avoid damage to gauge or gauge face.
Do not disconnect hoses prior to assembly.
Note: There are two sets of holes for bolts.
Use centermost holes on the side.
Note: Allow ram to rest on press
bed while installing pump.
Ram bolts directly to press frame using 4 of the 10 bolts included
with the press (one bolt, one washer and one nut for each corner
of the ram and for each of four holes in the press frame).
Attach bolts to opposite corners first. Hand tighten.
Wrench tighten after all four bolts have been tightened.
Top of press frame, looking down
Note: Hose must run BEHIND frame.
Inside of press frame,
looking up
6