- ページ 2

アウトドアカート Arcan ASC8200PのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Arcan ASC8200P 7 ページ。 Plastic 2 shelf service cart with aluminum legs

ASSEMBLY INSTRUCTIONS
Step 1: Assembly Preparation
Remove all contents from box. Reference the
parts list to make sure you have all the parts.
Verify your tabletop or workbench
can support 150 lbs. (68 kg.).
Failure to follow this warning
CAUTION
could result in damage to
property or personal injury.
Cover table or workbench to
NOTE
prevent any damage to surface
or cart.
Step 2: Attaching Casters
Place tray bottom upside down on the table or
work surface. Insert caster stem side down into
each corner, pressing down until base is flush
with caster. Be careful not to crush fingers or
hand.
Step 3: Attaching Legs
Place legs on leg mounts and tap gently with a
rubber mallet until all four legs are installed.
Do not use a metal hammer as it may cause
damage to your cart.
Step 4: Attaching Top Tray
NOTE
Position top tray so that it lines up the legs you
attached in step 3. Handle end of the top tray
should be on the same side as locking casters.
Tap gently on the top of tray with a rubber mallet
until assembly is complete.
ASC8200P: Parts Breakdown & Operating Manual
2.
3.
4.
2
rev. 09/18/09