Arcan ASC8200P Manual de instruções - Página 2

Procurar online ou descarregar pdf Manual de instruções para Carrinho de exterior Arcan ASC8200P. Arcan ASC8200P 7 páginas. Plastic 2 shelf service cart with aluminum legs

Imprimir página

ASSEMBLY INSTRUCTIONS

Step 1: Assembly Preparation

Remove all contents from box. Reference the

parts list to make sure you have all the parts.

Verify your tabletop or workbench

can support 150 lbs. (68 kg.).

Failure to follow this warning

CAUTION

could result in damage to

property or personal injury.

Cover table or workbench to

NOTE

prevent any damage to surface

or cart.

Step 2: Attaching Casters

Place tray bottom upside down on the table or

work surface. Insert caster stem side down into

each corner, pressing down until base is flush

with caster. Be careful not to crush fingers or

hand.

Step 3: Attaching Legs

Place legs on leg mounts and tap gently with a

rubber mallet until all four legs are installed.

Do not use a metal hammer as it may cause

damage to your cart.

Step 4: Attaching Top Tray

NOTE

Position top tray so that it lines up the legs you

attached in step 3. Handle end of the top tray

should be on the same side as locking casters.

Tap gently on the top of tray with a rubber mallet

until assembly is complete.

ASC8200P: Parts Breakdown & Operating Manual

rev. 09/18/09