- ページ 12

溶接システム ARCCAPTAIN ARC160のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ARCCAPTAIN ARC160 15 ページ。 Inverter welding machine

5.2 Strap Installation

Step 1: Separate the velcro.

Step 2: Pull out one side through the strap hole

on the front panel with hook side of the velcro

up.

Step 3: Pull out it to well stick hook side of the

velcro to loop side and across the nylon buckle.

Repeat it on the other side.

Step 4: Adjust the length by pulling the nylon

buckle (as shown in the picture).

Step 5: Proper state after installation:

1. Strap does not twist;

2. Buckle side of shoulder pad is up, while its

flat side faces the machine (as shown in the

picture);

3. Straps are well locked.