- ページ 4

自動車アクセサリー Axxess AXDSPL-MST1のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Axxess AXDSPL-MST1 16 ページ。 For gm dsp interface with amp bypass harness 2014-2018

10. Click the Identify button to confirm the interface is connected properly. A chime will be heard

from the front left speaker. Test all functions of the installation for proper operation.

Note: The outputs may need to be configured within the Outputs tab.

11. Adjust the settings in the app as desired. Press the Lock Down ‡ button to save any new

configurations.

‡ Anytime the interface is locked down the key must be cycled off then back on

Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing

multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all

amps combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.

INSTALLATION

(CONT.)

Amplifier Location

Chevrolet

Camaro: Right side of trunk

Colorado: Behind glove-box

Corvette: Middle of luggage compartment floor

Cruze: Right side of trunk

Equinox: Front of center console

Impala: Right side of luggage compartment

Malibu: Right side of trunk

Silverado: Rear of passenger compartment,

Suburban: Rear left side quarter panel

Tahoe: Rear left side quarter panel

Traverse: Front of center console

behind seat

GMC

Canyon: Behind glove-box

Sierra: Rear of passenger compartment,

behind seat

Yukon: Rear left side quarter panel

Yukon XL: Rear left side quarter panel