Axxess AXDSPL-MST1 Installation Instructions Manual - Page 4
Browse online or download pdf Installation Instructions Manual for Automobile Accessories Axxess AXDSPL-MST1. Axxess AXDSPL-MST1 16 pages. For gm dsp interface with amp bypass harness 2014-2018
Print Page
10. Click the Identify button to confirm the interface is connected properly. A chime will be heard
from the front left speaker. Test all functions of the installation for proper operation.
Note: The outputs may need to be configured within the Outputs tab.
11. Adjust the settings in the app as desired. Press the Lock Down ‡ button to save any new
configurations.
‡ Anytime the interface is locked down the key must be cycled off then back on
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all
amps combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
4
INSTALLATION
(CONT.)
Amplifier Location
Chevrolet
Camaro: Right side of trunk
Colorado: Behind glove-box
Corvette: Middle of luggage compartment floor
Cruze: Right side of trunk
Equinox: Front of center console
Impala: Right side of luggage compartment
Malibu: Right side of trunk
Silverado: Rear of passenger compartment,
Suburban: Rear left side quarter panel
Tahoe: Rear left side quarter panel
Traverse: Front of center console
behind seat
GMC
Canyon: Behind glove-box
Sierra: Rear of passenger compartment,
behind seat
Yukon: Rear left side quarter panel
Yukon XL: Rear left side quarter panel