ページを印刷する
Mark location for Beige Clip
Install the clip with the open side facing the back of the printer and the hinge toward the
front of the printer housing. The back of the clip should be 1 ½" from the rear grove in
the housing and the right side of the clip should be touching the groove in the housing.
Finally, check that the Beige Clip and 1400 Tube Clip are in line (parallel with the front and
back of the printer openings) with a straight edge or ruler.
Verify 1400 Tube Clip and Beige Clip are in line
Step 7
Move the cartridge carriage to the opening in the center of the printer housing by pushing
it from the right.
Move carriage with hand over to the left most access hole (center of printer)
S a v e
M o n e y
a n d
I m p r o v e
Y o u r
P r i n t i n g
MIS Associates Inc
2901 Auburn Rd
Auburn Hills, MI 48326
800-445-8296
http://www.inksupply.com
Fax: 248-289-6013
Email: [email protected]