- ページ 8

プリンター Epson ActionLaser IIのPDF 製品情報をオンラインで閲覧またはダウンロードできます。Epson ActionLaser II 12 ページ。 Epson actionlaser actionlaser ii: product information
Epson ActionLaser II にも：製品サポート速報 (2 ページ)

ページを印刷する

ActionLaser II

[E] INSUFF MEMORY

The printer has insufficient memory available for the task you

it. To correct

have given

the

remains, press RESET or perform INITIALIZE. This error can also

be cleared by turning the printer off and back on again. However,

it may be necessary to simplify the page you are trying to print or

add more memory to the printer.

[E] PAGE BUFFER FULL

Text or graphics data has filled the printer's buffer and an

incomplete page is ejected. Press

may need to add more memory to

[S] PAPER FEEDING

The printer is feeding paper.

[E] PAPER JAM

Paper is

being fed into the printer or paper is jammed inside

not

the paper path. See the PAPER JAM section later in this chapter.

[E] PAPER OUT

There is no paper in the standard paper cassette or the optional

multi-media feeder (if installed). Insert more paper into the

selected paper cassette or manually feed a sheet of paper into the

printer.

[E] PAPER OUT [paper source][paper size]

There is

paper in the paper source from which the printer

expects to feed paper. The right column of the display prompts

you to load the correct paper size into the paper source.

[E] PAPER SIZE ERROR

The paper size you selected with SelecType (or the default size if

you have not

selected

size) does

the selected paper

source.

Press

the correct paper

or change

application software or with SelecType.

[S] PRINTING

The printer has received data and is printing.

[S] PRINT STOP

The printer stops printing during a multi-copy print operation.

[S] RAM Check X.X MB

The printer is checking RAM (X.X = capacity).

IS] READY

The printer is ready to print.

[E] REINSERT CARD

If this message appears on the display, you may have

identity card or a font cartridge while the

while

the

printer was on line. To correct the error, make sure the

printer is off line. Next, reinsert the card or cartridge and press

CONTINUE.

[E] REMOVE CARD

You may have inserted an identity card or a font cartridge while

the printer was on line or while

error, take the printer off line, then remove the card or

this

cartridge and press

CONTINUE.

cartridge, make sure that all data in the buffer has been printed

and that the printer is off

line. If the FEED light is on,

print out the remaining data.

ALll-8

error, press

CONTINUE.

the message

to clear

error. You

CONTINUE

the

printer.

not match

the paper loaded in

CONTINUE

to clear

the

error. Insert

the P-SIZE setting

with your

removed an

FEED

light was still lit or

light was on. To correct

the FEED

Before reinserting

card or

the

press

FEED

[E] RESELECT TRAY

optional

The

multi-media

option is set to OPT or AUTO. Install the optional multi-media

feeder and

press

then

use the optional multi-media feeder, simply press

paper is automatically selected from the standard paper cassette.

[S] RESET

The printer has been reset to previous settings to the macro

number specified with the LOAD MACRO setting in

CONFIG option of SelecType Level 1.

[S] ROM Check

The printer is checking ROM.

[E] SAVE MEMORY OVERFLOW

This message may appear

with the SYSTEM CONFIG option SAVE MACRO setting in

SelecType Level 1. The printer does

save any additional macros. To correct this error, delete unused

macros using the DELETE MACRO setting, and then repeat

SAVE MACRO.

[E] SERVICE REQ. CXXX

[E] SERVICE REQ. E00XX

A controller or print engine error has been detected. Write down

the error number

and turn off the printer. Turn the printer back on after a few

see if the error message still appears. If it does, turn off

seconds to

the printer, unplug the power cord from the electrical outlet, and

contact a qualified service person.

[E] SET [paper size] MANUAL

This message requires that you set the paper size for manual

feeding.

[E] STARTUP ERROR

Press a to continue.

[E] SET FULL PRINT

This message may appear

mix of

text and

FULL PRINT setting in SelecType Level 1. See Chapter 4 for more

information about this setting.

[S] STANDBY MODE

If the standby mode is enabled, the printer enters this mode when

it is not used for about thirty minutes. This

Press any control panel button or send data to the printer to

warm it up. It will also enter this mode after 8

mode is disabled.

[W] TONER LOW

The printer is almost out of toner. When you see this message,

you can still print up to 20 more pages. Then you must replace the

toner cartridge.

[E] TONER OUT

The toner cartridge must be replaced.

[E] TRAY SET XXX

The paper-size setting does not match the paper loaded in the

specified paper cassette. The right column of

the currently selected cassette and

can either change the paper-size setting or load the correct paper

size. After you correct the paper mismatch, press

[S] WARMING UP

The printer is warming up.

9/17/91

feeder is not installed and the INPUT

However, if you decide not to

CONTINUE.

are trying to save a

when you

enough memory to

not have

that

appears in the right column of the display

are trying to print graphics

when you

graphics. Press

and then

CONTINUE

message

hours even

the

expected paper size. You

and

CONTINUE

SYSTEM

the

macro

change the

appears.

if the

display indicates

CONTINUE.

Laser Printers