ページを印刷するOperating the Pedicure Spa
After the spa has been installed and the plumbing and electrical connections have been
completed, clean the tub and wipe dry with a clean towel. Follow these instructions to
test the pedicure spa:
1. Turn the "drain handle" (2) to open/close the drain. *Note: If drain will not open,
check the water stopper and tighten/loosen the adjustment screw as needed.
2. Fill the tub until the pipeless jet is completely submerged in water by lifting the faucet
handle (1).
3. Press the left button (3) to turn on/off the pipeless jet.
4. Press the right button (4) to turn on/off the discharge pump (if unit is equipped with
one).
Note: If the discharge pump is not used, the water will drain out automatically.