ページを印刷するCleaning and Disinfecting the Pedicure Spa
Please follow these instructions to clean and disinfect the spa:
Between Each Customer
1. Drain all water and remove debris from the spa.
2. Clean the spa with soap or detergent and water.
3. Spray the surfaces and walls of the spa using the attached sprayer.
4. Wipe the spa dry with a clean towel.
Daily Flushing of the Pipeless Jet System
The spa must be thoroughly cleaned after the last pedicure of the day in the following
manner:
1. Remove the jet cover by turning counter-clockwise.
2. Remove all debris trapped behind the cover and/or impeller.
3. Clean all parts with a mild soap, vinegar solution, or detergent and water.
4. Do not run the pipeless jet without the jet cover/magnetic head and impeller in place.
5. Fill the tub basin with about 5 gallons of water.
6. Turn the pipeless jet on.
7. Add 3 teaspoons of low-foaming dishwasher detergent and 2 ounces of bleach to the
tub basin.
8. Run pipeless jet for 10-15 minutes and drain the tub basin.
9. Clean the exterior of the pedicure spa with a soft cloth and mild detergent.
Biweekly Cleaning of the Pipeless Jet System
In addition to the daily cleaning, the follow cleaning procedures must be performed every
other week:
1. Fill the basin with 5 gallons of water.
2. Turn the pipeless jet on.
3. Add 3 teaspoons of low-foaming dishwasher detergent and 2 ounces of bleach to the
tub basin.
4. Run pipeless jet for 10-15 minutes. Let the water sit overnight in the tub (6-10
hours).
5. Run the pipeless jet for 5 minutes and drain the tub basin.
6. Follow the instructions in "Daily Flushing of the Pipeless Jet System."