- ページ 3
Rfidシステム Digilock Numeris Versa MiniのPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。Digilock Numeris Versa Mini 11 ページ。 Touch rfid
Digilock Numeris Versa Mini にも： マニュアル (18 ページ), 製品マニュアル (11 ページ)
ページを印刷する
Programming Instructions
Add Manager Keys
Manager Keys can be programmed to the locks at any time.
1
Go to a lock requiring additional
Manager Keys.
Press
=` 55 `
.
The LED will fl ash.
Programming Instructions
Replace Keys
The locks must be reprogrammed to prevent the lost/stolen keys from operating a lock.
1
To replace the Programming Key:
Note the order or serial number (found on the lock's rear).
1a
To replace the Manager Keys:
Collect all remaining and replacement Manager Keys.
Go to any lock operated by the lost/stolen Manager Keys.
Press
=` 55 `
.
The LED will fl ash.
Product Guide
2
While the LED is fl ashing, insert
the Programming Key.
A two-tone beep will be heard.
1b
Keypad
Shared & Assigned Use Functionality
3
While the LED is fl ashing, insert
each additional Manager Key one
at a time.
A beep will be heard for each
Manager Key programmed.
2
Contact Digilock Support to purchase a replacement Programming Key.
2a
While the LED is fl ashing, insert the Programming Key.
A two-tone beep will be heard.
Insert the Programming Key again.
Three sets of two-tone beeps will be heard and the LED will turn off. All
previously programmed Manager Keys will be erased.
Follow instructions to Add Manager Keys to program the remaining and
replacement Manager Keys to the locks.
4
Insert the Programming Key.
A two-tone beep will be heard and
the LED will turn off.
Repeat above steps for each lock
or follow instructions to Express
Register Manager Keys to quickly
program multiple locks to operate
with the same Manager Keys.
2b
3