- ページ 2
Rfidシステム Digilock Numeris Versa MiniのPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。Digilock Numeris Versa Mini 11 ページ。 Touch rfid
Digilock Numeris Versa Mini にも: マニュアル (18 ページ), 製品マニュアル (11 ページ)
Setup
Locks are shipped with factory default settings (only operates by pressing = `). Each lock must be set up to operate with a Programming
Key and Manager Keys.
1
Insert the Programming Key.
A two-tone beep will be heard
and the LED will fl ash.
Programming Instructions
Express Register Manager Keys
The Programming Key can quickly program multiple locks to operate with the same Manager Keys.
1
Go to a lock already programmed to operate with the Manager Keys.
Press
=` 61 `
.
The LED will fl ash.
3
Insert the Programming Key to program each lock to operate with the
same Manager Keys.
Two sets of two-tone beeps will be heard and the LED will fl ash twice to
indicate successful programming.
*The Programming Key will continue to function in Express Registration mode until it is used to operate a lock.
2
Product Guide
2
While the LED is fl ashing, insert one
Manager Key at a time.
A beep will be heard for each
Manager Key programmed.
Keypad
Shared & Assigned Use Functionality
3
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
2
While the LED is fl ashing, insert the Programming Key.
A two-tone beep will be heard and the LED will turn off.
4a
End Express Registration mode.*
Go to any programmed lock.
Press
=`
then insert the Programming Key.
4
Repeat above steps for each lock
or follow instructions to Express
Register Manager Keys to setup
all locks.
4b