Digilock Numeris Versa Mini 제품 설명서 - 페이지 2

{카테고리_이름} Digilock Numeris Versa Mini에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digilock Numeris Versa Mini 11 페이지. Touch rfid
Digilock Numeris Versa Mini에 대해서도 마찬가지입니다: 매뉴얼 (18 페이지), 제품 설명서 (11 페이지)

페이지 인쇄

Setup

Locks are shipped with factory default settings (only operates by pressing = `). Each lock must be set up to operate with a Programming

Key and Manager Keys.

Insert the Programming Key.

A two-tone beep will be heard

and the LED will ﬂ ash.

Programming Instructions

Express Register Manager Keys

The Programming Key can quickly program multiple locks to operate with the same Manager Keys.

Go to a lock already programmed to operate with the Manager Keys.

Press

=` 61 `

The LED will ﬂ ash.

Insert the Programming Key to program each lock to operate with the

same Manager Keys.

Two sets of two-tone beeps will be heard and the LED will ﬂ ash twice to

indicate successful programming.

*The Programming Key will continue to function in Express Registration mode until it is used to operate a lock.

Product Guide

While the LED is ﬂ ashing, insert one

Manager Key at a time.

A beep will be heard for each

Manager Key programmed.

Keypad

Shared & Assigned Use Functionality

Insert the Programming Key.

A two-tone beep will be heard

and the LED will turn off.

While the LED is ﬂ ashing, insert the Programming Key.

A two-tone beep will be heard and the LED will turn off.

End Express Registration mode.*

Go to any programmed lock.

Press

then insert the Programming Key.

Repeat above steps for each lock

or follow instructions to Express

all locks.